![P1000H3 - 1-5/8" x 1-5/8", 12 Ga, 9/16" Holes on 3 Sides image P1000H3 - 1-5/8" x 1-5/8", 12 Ga, 9/16" Holes on 3 Sides image](https://cdn11.bigcommerce.com/s-2flh4k5xkx/images/stencil/300x300/products/116/1655/P1000-H3__93271.1660066391.jpg?c=1)
Unistrut's P5000HS has round holes on the back side for use with 1/2" threaded rod and fasteners (or smaller diameters with use of flat washers). These holes can eliminate the need for field drilling when installing a trapeze support, anchoring the channel to a surface, or for many other applications.
This channel is commonly used for trapeze supports, seismic bracing, and anchoring to floors, ceilings and walls. This is a great product for certain seismic bracing applications where slots are not allowed.
Product dimensions are 1 5/8" wide x 3 1/4" tall x 12 ga. thick; with round holes on one side. The holes are 9/16" in diameter and 1 7/8" on center. The hole diameters and spacing match Unistrut’s general fittings so that nearly all our fittings can be attached through these holes.
Our P5000HS is available in the following finishes: Pre-Galvanized (PG), Hot-Dip Galvanized (HG), Plain (PL), and Green (GR).
- Quote Only:
- Yes