P1386 - Beam Clamp image

P1386 - Beam Clamp

SKU:
P1386 EG
$3.15
Download General Fittings Catalog
Current Stock:
Description

Allowable (Design) Loads:

  • Pullout - 1,200 lbs
  • Slip Along - 200 lbs
  • Slip Thru - 600 lbs

Design Loads (Each, use in pairs only):

  • P1000 - 600 lbs
  • P1100 - 500 lbs
  • P2000 - 450 lbs

Notes:

  1. Design loads only apply to UNISTRUT brand products. Look for "UNISTRUT" on the part.
  2. Seismic design loads are for the 2 clamp installation as shown above. Must use clamps in pairs.
  3. Design loads are based on static testing with a safety factor = 5 based on ultimate strength of connection.
  4. Design loads apply only when used with 12ga. UNISTRUT channel.
  5. A 1/2" Chanel Nut and Bolt are required for installation.
  6. Set Screw Installation Torque: 125 in-lbs (14 N-m)

View full design load report here

View the EMT Clamp Hardware memorandum here 

View the Pipe & GRC Clamp Hardware memorandum here 

View the Clamp Height and Hardware OD Tubing doc here 

View the Clamp Height and Hardware Pipe and Rigid Conduit doc here 

Downloads
Download STP File(s)
Download SAT File(s)
Download DXF File(s)
Download DWG File(s)
Additional Information